subject
Physics, 18.04.2021 17:10 keigleyhannah30

A steel ring with a how having area of 3.99cm2 is to be placed on an aluminum rod with cross sectional area of 4.0cm. both rod and ring are initially at the temperature of 35.0°C. At what common temperature can the steel ring split into the rod at the end of aluminum rod​

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:00, blackwell0315
1point) a skydiver weighing 130 lb (including equipment) falls vertically downward from an altitude of 14,000 ft and opens the parachute after 20 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.85|v|0.85|v| when the parachute is closed and is of magnitude 17|v|17|v| when the parachute is open, where the velocity vv is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. find the speed of the skydiver when the parachute opens. speed is 150.6121788 ft/s find the skydiver's height when the parachute opens. height is 2338.98591 ft find the limiting velocity vlvl after the parachute opens. (think about whether this should be positive or negative.) vl=vl= 7.647 ft/s
Answers: 2
image
Physics, 22.06.2019 11:30, alupton4887
Arocket starts from rest and moves upward from the surface of the earth. for the first 10.0 s of its motion, the vertical acceleration of the rocket is given by ay = 12.80 m/s32t, where the +y-direction is upward. (a) what is the height of the rocket above the surface of the earth at t = 10.0 s? b) what is the speed of the rocket when it is 325 m above the surface of the earth?
Answers: 3
image
Physics, 22.06.2019 16:30, LukeneedhelpInMath
Name two kinds of practical electric pumps.
Answers: 2
image
Physics, 22.06.2019 18:10, victoriakraus6599
A200-n force is applied to the foot-operated air pump. the return spring s exerts a 2.6-n·m moment on member oba for this position. determine the corresponding compression force c in the cylinder bd. if the diameter of the piston in the cylinder is 40 mm, estimate the air pressure generated for these conditions. state any assumptions. enter a positive number for the compression force c.
Answers: 2
You know the right answer?
A steel ring with a how having area of 3.99cm2 is to be placed on an aluminum rod with cross section...

Questions in other subjects:

Konu
Health, 07.12.2020 04:30