Physics, 16.04.2021 20:50 toricepeda82

A swing with a beautiful sea view is hung from a tree branch that is found to obey Hooke's law so that when a 20-kg load (a person sits on the swing with a mass of 20-kg ) the branch sags 10 cm. a) How much will the branch sag if a 40-kg mass gets on the swing. b). How much will the branch sag if a 60-kg mass gets on the swing?

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 12:40, goldenhawk239

In guinea pigs, assume black coat is completely dominant over white. to determine whether an unknown black guinea pig is pure or hybrid black, it should be crossed with bb, bb, bb

Answers: 2

continue

Physics, 22.06.2019 03:00, ambercuevas2707

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigeratorâ€™s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

Answers: 2

continue

Physics, 22.06.2019 03:10, joho38

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Answers: 2

continue

Physics, 22.06.2019 07:10, ddswaggsoflyy3176

Polly is pushing a box across the floor with a force of 30 n. the force of gravity is –8 n, and the normal force is 8 n. which value could describe the force of friction if polly could not move the box?

Answers: 2

continue

You know the right answer?

A swing with a beautiful sea view is hung from a tree branch that is found to obey Hooke's law so th...