subject
Physics, 13.04.2021 04:40 abelxoconda

A crane in a marble quarry is mounted on the rock walls of the quarry and is supporting a 2000 kg slab of marble. The center of mass of the 900 kg boom is located one-third of the way from the pivot end of its 15-m length, and the cable supporting the boom is attached at 10.0 m from the pivot end. What is the tension in the cable supporting the boom? g

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:30, JOEFRESH10
Which of the following are properties of mechanical waves? check all that apply ⭕️ particles of the medium move back and fourth, but do not move with the wave. ⭕️ the particles of the medium always move parallel to the wave motion. ⭕️ wave motion begins with a disturbance in the medium. ⭕️ waves transport energy from a source outward, away from the source.
Answers: 2
image
Physics, 22.06.2019 09:00, alisonnn101
A2000 kg car is rounding a curve of radius 200 m on a level road. the maximum frictional force the road can exert on the tires of the car is 4000 n. what is the highest speed at which the car can round the curve?
Answers: 1
image
Physics, 22.06.2019 10:40, rainbowboi
As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.
Answers: 1
image
Physics, 22.06.2019 18:00, maren17
Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)
Answers: 3
You know the right answer?
A crane in a marble quarry is mounted on the rock walls of the quarry and is supporting a 2000 kg sl...

Questions in other subjects:

Konu
Mathematics, 04.06.2020 19:58
Konu
Mathematics, 04.06.2020 19:58
Konu
Mathematics, 04.06.2020 19:58