subject
Physics, 12.04.2021 05:50 GusGus11

A friend shared a document to you through the scanning app CamScanner: Link: https://www. camscanner. com/share/show?device_id=AD_SN-4200 1A41C620258F&sid=E02B9173C9D641 F1907MS916&pid=dsa
Link expires on: 2021-04-14

Try to use an efficient learning office scanning app that is used by 400 million people: https://cc. co/16YRy8?p=sl&pid=dsa&af_s ub1=SN-42001A41C620258F​

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:20, kayelynn003
If the force on an object is in the negative direction, the work it does on the object must be [2 points a) negative. b) positive c) the work could be either positive or negative, depending on the direction the object moves
Answers: 1
image
Physics, 22.06.2019 06:00, jagmeetcheema
The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒
Answers: 3
image
Physics, 22.06.2019 10:10, Kitty10101
Apair of 10μf capacitors in a high-power laser are charged to 1.7 kv. a. what charge is stored in each capacitor? b. how much energy is stored in each capacitor?
Answers: 2
image
Physics, 22.06.2019 12:00, angelamirga332
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
A friend shared a document to you through the scanning app CamScanner: Link: https://www. camscanne...

Questions in other subjects: