I WILL REPORT YOU IF YOU DON'T ANSWER QUESTION OR IF YOU PUT A LINK You are asked to design an experiment that would wold allow you to measure the inertial mass of an unknown object. You decide to set up a modified Atwood experiment with a cart on a nearly frictionless track that is pulled by a mass hanging on a string that is draped across a pulley.
Which of the following includes the correct steps for a valid experiment needed to calculate the best value of the inertial mass for an unknown object?

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Afigure skater is rotating at a rate of 200 revolutions per minute. what is the angular speed, in units of rad/s? 20.9 12000 200 3.33

While standing outdoors one evening, you are exposed to the following four types of electromagnetic radiation: yellow light from a sodium street lamp, radio waves from an am radio station, radio waves from an fm radio station, and microwaves from an antenna of a communications system. rank these type of waves in terms of increasing photon energy.