A 0.2 kg ball is charged up to a net charge of Q, and is then suspended on a 0.25 m string in a uniform horizontal electric field strength of your [E=Birth month N/C] , Choose an angle of your choice at which the ball comes to rest =(30, 20,45 deg) from the vertical. What is the charge on the ball?

 q = 27.16 C

Explanation:

For this exercise we use the equations of equilibrium. Let's set a reference system with the x-axis horizontally.

X axis

            F_e - Tₓ = 0

Axis y

           T_y -W = 0

let's use trigonometry

           cos θ = T_y / T

           sin θ= Tx / T

           T_y = T cos θ

           Tₓ = T sin θ

Axis y

            T cos θ = W

            T = mg / cos θ

X axis

            F_e = T sin θ

            qE = T sin θ

            q =    

            q =

            q =

in the exercise they indicate that the electric field is the month of birth E = 8 N / C and the angle tea = 30º

let's calculate

              q = 0.2 9.8 8 / tan 30

              q = 27.16 C

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

electrical power