Mass = 20Kg
velocity = 10m/s
what is the kinetic energy

Asimply means that over time there was some sort of change.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

A1000-kg weather rocket is launched straight up. the rocket motor provides a constant acceleration for 16-s, then the motor stops. the rocket altitude 20-s after launch is 510-m. you can ignore any effects of air resistance. a. what was the rocket’s acceleration during the first 16-s? b. what is the rocket’s speed as it passes through a cloud 5100-m above the ground?