subject
Physics, 20.12.2019 13:31 dondre54

The capacitor in the figure (figure 1) is initially uncharged. the switch is closed at t=0.

immediately after the switch is closed, what is the current through the resistor r1?

immediately after the switch is closed, what is the current through the resistor r2?

immediately after the switch is closed, what is the current through each resistor r3?

what is the final charge on the capacitor?


The capacitor in the figure (figure 1) is initially uncharged. the switch is closed at t=0.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:50, diana156
Select the correct answer from each drop-down menu. compared to its surroundings, the concentration of solutes is low inside a cell. so, the cell is with respect to its surroundings. a particular solute in this cell uses energy for its transport from the cell to its surroundings. this type of transport is called
Answers: 3
image
Physics, 22.06.2019 10:10, sadie960
Aclarinetist, setting out for a performance, grabs his 3.350 kg clarinet case (including the clarinet) from the top of the piano and carries it through the air with an upward force of 24.65 n. find the case's vertical acceleration. indicate an upward acceleration as positive and a downward one as negative.
Answers: 1
image
Physics, 22.06.2019 18:00, RyannLambertt7141
Cells in the nervous system have a potential difference of 70 mv across the cell membrane separating the interior of the cell from the extracellular fluid. this potential difference is maintained by ion pumps that move charged ions across the membrane. is this an emf? select the correct answer and explanation. 1)no. the ion pumps cannot separate charges; thus, they cannot create a potential difference. 2)yes. the ion pumps cannot separate charges, but they still can create a potential difference. 3)yes. the ion pumps can actively separate charge; thus, they can create a potential difference. 4)no. the ion pumps can separate charges, but they cannot create a potential difference.
Answers: 1
image
Physics, 22.06.2019 21:20, CM0
Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?
Answers: 1
You know the right answer?
The capacitor in the figure (figure 1) is initially uncharged. the switch is closed at t=0.

Questions in other subjects:

Konu
Social Studies, 08.10.2019 17:40