Which property is not commonly used to identify minerals? A)
luster
B)
texture
hardness
D)
crystal form

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

What would people living along the coast in south florida do if there was a hurricane warning? move to locations away from the water flock along coasts to watch the natural phenomenon buy instruments to predict the exact location of the hurricane measure water levels to know the exact time of the hurricane

An ascending elevator, hanging from a cable, is coming to a stop. part a part complete identify all forces acting on the elevator from the list below. select all that apply. select all that apply. kinetic friction normal force tension weight static friction submitprevious answers correct part b draw a free-body diagram of the object. draw the vectors starting at the black dot. the location and orientation of the vectors will be graded. the exact length of your vectors will not be graded but the relative length of one to the other will be graded.