Physics, 07.10.2019 01:00 djdjdjdbdbjx
What is the centripetal force needed to keep a 3.0 kg mass moving in a circle of radius 0.50 m at a speed of 8.0 m/s
Answers: 3
Physics, 21.06.2019 22:30, mooredollie
If a sphere and a cure have the same mass and are propelled up a ramp with the same force, which would travel father up the ramp? explain.
Answers: 1
Physics, 22.06.2019 01:10, caguil00
Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)
Answers: 3
Physics, 22.06.2019 21:20, CM0
Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?
Answers: 1
Physics, 23.06.2019 07:00, jemseidle8889
Calculate the linear momentum of a pickup truck that has a mass of 1000kg, and is traveling eastward at 20 m/s
Answers: 1
What is the centripetal force needed to keep a 3.0 kg mass moving in a circle of radius 0.50 m at a...
English, 30.11.2020 22:50
Social Studies, 30.11.2020 22:50