subject
Physics, 17.02.2021 20:30 lalacada1

Mac and Tosh stand 8 meters apart and demonstrate the motion of a transverse wave using a thick rope. The wave can be described as having a vertical distance of 32 cm from a trough and crest, a frequency of 2.4 Hz, and a horizontal distance of 48 cm from a crest to the nearest trough.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 10:30, johnthienann58
The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g
Answers: 1
image
Physics, 22.06.2019 11:20, cjd1214812148
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
image
Physics, 22.06.2019 15:30, haha81
Identify the correct relation showing that the radius r of the orbit of a moon of a given planet can be determined from the radius r of the planet, the acceleration of gravity at the surface of the planet, and the time τ required by the moon to complete one full revolution about the planet. determine the acceleration of gravity at the surface of the planet jupiter knowing that r = 71 492 km and that t= 3.551 days and r= 670.9 × 10^3 km for its moon europa.
Answers: 2
image
Physics, 22.06.2019 19:40, mcmccann4317
It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc
Answers: 1
You know the right answer?
Mac and Tosh stand 8 meters apart and demonstrate the motion of a transverse wave using a thick rope...

Questions in other subjects:

Konu
Mathematics, 15.12.2020 04:10
Konu
Social Studies, 15.12.2020 04:10
Konu
Mathematics, 15.12.2020 04:10