Physics, 11.02.2021 22:40 peno211

Anyone good at math I will pay $10 a test for someone to take my tests in mymathlab Mathlab also lets you pause the test and go look at the problems for help and you can take as much time as you need also you get three attempts per test I'm not good at math so need help anyway message me if your interested 7274304792 I will venmo you the money someone please help me!!

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 02:30, jamesnoro

Acup of coffee sits on the dashboard of an automobile. the car goes around a sharp curve. even though you hold the cup still, coffee still splashes out. this can best be explained due to a) density. b) friction. c) gravity. d) inertia.

Answers: 2

continue

Physics, 22.06.2019 02:50, lilybear1700

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Answers: 3

continue

Physics, 22.06.2019 08:20, jrjordans13ox06qs

At an oceanside nuclear power plant, seawater is used as part of the cooling system. this raises the temperature of the water that is discharged back into the ocean. the amount that the water temperature is raised has a uniform distribution over the interval from 10° to 25° c. what is the standard deviation of the temperature increase?

Answers: 1

continue

Physics, 22.06.2019 10:30, johnthienann58

The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g

Answers: 1

continue

You know the right answer?

Anyone good at math I will pay $10 a test for someone to take my tests in mymathlab Mathlab also let...