Lolliguncula brevis squid use a form of jet propulsion to swim—they eject water out of jets that can point in different directions, allowing them to change direction quickly. When swimming at a speed of 0.15m/s0.15m/s or greater, they can accelerate at 1.2m/s21.2m/s 2 . (a) Determine the time interval needed for a squid to increase its speed from 0.15m/s0.15m/s to 0.45m/s0.45m/s.
(b) What other questions can you answer using the data?

Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n

The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?

An insulated 40 ft^3 rigid tank contains air at 50 psia and 120°f. a valve connected to the tank is now opened, and air is allowed to escape until the pressure inside drops to 25 psia. the air temperature during this process is kept constant by an electric resistance heater placed in the tank. determine the electrical work done during this process.