Which of the following describes motion caused by a contact force

Abanked road comer of radius 146 m is to be constructed. if the comer is designed for vehicles moving with a speed of 20.0 m/s, what should the banking angle be, in units of degrees?

Aplane flies a distance d from west to east at a constant speed vp , with respect to the air in a time twe . on the return trip, the plane flies a distance d from east to west at a constant speed vp , with respect to the air in a time tew . on both trips the wind blows from west to east at a constant speed va , with respect to the ground 1) what is tew in terms of vp, va, and d, as needed? tew=dvp tew=dvp+va tew=dva tew=dvpâ’va tew=12dvp tew=12dvp+va tew=12dvpâ’va your submissions: b submitted: saturday, january 26 at 6: 49 pm feedback: feedback will be given once all questions have been attempted and the grade cluster button has been pressed. 2) what is twe in terms of vp, va, and d, as needed? twe=dvp twe=dvp+va twe=dva twe=dvpâ’va twe=12dvp twe=12dvp+va twe=12dvpâ’va your submissions: d submitted: saturday, january 26 at 6: 49 pm feedback: feedback will be given once all questions have been attempted and the grade cluster button has been pressed. 3) assuming d = 2300 miles, vp = 400 miles/hr, and twe = 4 hours, what is va, the speed of the wind with respect to the ground? va = 100 miles/hr va = 575 miles/hr va = 200 miles/hr va = 175 miles/hr va = 975 miles/hr 4) once again, assuming d = 2300 miles, vp = 400 miles/hr, and twe = 4 hours, what is tew, the time it takes the plane to fly a distance d miles from east to west? tew = 5.75 hours tew = 11.5 hours tew = 7.67 hours tew = 8 hours tew = 10.2 hours

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.