Physics, 04.02.2021 20:50 meaganblatcher

At time t = 0 s, a puck is sliding on a horizontal table with a velocity 3.60 m/s, 35.0° above the +x axis. As the puck slides, a constant acceleration acts on it that has the following components: a = - 2 0.360 m/s and da, = -0.980 m/s. What is the velocity of the puck at time t = 1.50 s? 2 0

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:10, Katyazamo

The 10-kg double wheel with radius of gyration of 125mm about o is connected to the spring of stiffness k = 600 n/m by a cord which is wrapped securely around the inner hub. if the wheel is released from rest on the incline with the spring stretched 225 mm, calculate the maximum velocity v of its center o during the ensuing motion. the wheel rolls without slipping

Answers: 1

continue

Physics, 22.06.2019 08:00, Lovelybunny321

What is a carrier wave and how does it affect what you hear on the radio

Answers: 1

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

continue

Physics, 22.06.2019 14:00, nina288

Una carga puntual de 3 x 10-6 c se coloca a 12 cm de una segunda carga puntual de - 1,5 x 10-6 c. calcular la magnitud fuerza eléctrica entre las cargas

Answers: 2

continue

You know the right answer?

At time t = 0 s, a puck is sliding on a horizontal table with a velocity 3.60 m/s, 35.0° above the +...