subject
Physics, 28.01.2021 19:50 groundcontrol

8th grade science help help


8th grade science help help

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 10:00, chaseashley24
** urgent** the voltage across the primary winding is 350,000 v, and the voltage across the secondary winding is 17,500 v. if the secondary winding has 600 coils, how many coils are in the primary winding? a- 30 coilsb- 583 coilsc- 12,000 coilsd- 332,500 coils
Answers: 1
image
Physics, 22.06.2019 17:40, yoongnzl
Aspring is used to stop a 50-kg package which is moving down a 20º incline. the spring has a constant k = 30 kn/m and is held by cables so that it is initially compressed 50 mm. knowing that the velocity of the package is 2 m/s when it is 8 m from the spring and neglecting friction, determine the maximum additional deformation of the spring in bringing the package to rest.
Answers: 1
image
Physics, 23.06.2019 02:10, Nathaliasmiles
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.
Answers: 1
image
Physics, 23.06.2019 03:00, blancademarco1994
A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu
Answers: 1
You know the right answer?
8th grade science help help
...

Questions in other subjects:

Konu
Mathematics, 12.04.2021 22:30