1.A student wishes to find the volume of a piece of wood of irregular shape. her experiment requires House of a smaller brass object of mass 2009. Calculate the volume of the brass Object. He density of brass is 8.49km3? 2. Determine the diameter of the ball, as measured by the vernier callipers shown in ke diagram. A micrometer screw gauge can be used to measure the thickness of a sheet of plastic. What value is shown in the diagram?

Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

An athlete swings a ball, connected to the end of a chain, in a horizontal circle. the athlete is able to rotate the ball at the rate of 8.13 rev/s when the length of the chain is 0.600 m. when he increases the length to 0.900 m, he is able to rotate the ball only 6.04 rev/s. (a) which rate of rotation gives the greater speed for the ball? 6.04 rev/s 8.13 rev/s (b) what is the centripetal acceleration of the ball at 8.13 rev/s? m/s2 (c) what is the centripetal acceleration at 6.04 rev/s? m/s2