Physics, 18.01.2021 19:10 arielpraczko1

A wheel is being turned to open a valve on a compressor. The resistance that is applied to the axle of the valve is 235 lb. The diameter of the wheel that is being turned is 20in and an effort force of 45 lb is being applied to the wheel. What is the required diameter of the axle to overcome the resistance force

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 19:30, Jazminfun70

Density of salty water as compared to the density of pure water is(a) is less(b) is always equal(c) is always more(d) may be less or more

Answers: 1

continue

Physics, 22.06.2019 07:30, babygreg2001p97abr

Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?

Answers: 1

continue

Physics, 22.06.2019 13:40, mvongphakdy8746

Consider a double atwood machine constructed as follows: a mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. the other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. using two suitable generalized coordinates, set up the lagrangian and use the lagrange equations to find the acceleration of the mass 4m when the system is released. explain why the top pulley rotates even though it carries equal weights on each side.

Answers: 2

continue

Physics, 23.06.2019 01:30, beckytank6338

Mackinzie walks 4 blocks west, then 2 blocks south, then 4 blocks east, and, finally, 1 block south. what is the magnitude of her total displacement duringthis walk (in blocks)?

Answers: 2

continue

You know the right answer?

A wheel is being turned to open a valve on a compressor. The resistance that is applied to the axle...