Physics, 12.12.2020 16:30 Pfaith8617

Calculate the final volume (in cm3) of a 40 cm long cylindirical copper rod with a cross-sectional area of 1.2 cm2 when it is
a) stretched with a load of 4.0×105 Newtons,
(ν= 0.32, E= 70 GPa, σy = 300 GPa, σTS= 650 GPa, rCu = 120 pm)
b) Compare the absolute volume change during this process.
c) Assume that the stress is applied along [100] direction. Compute the unit cell parameters (a, b,
and c) during the application of the stress.
2) A cylindirical rod of a length of 22.4 cm and a radius of 1.2 cm is deformed plastically when it is pressed
with load of 4.758×108 Newtons. Calculate the final volume of the specimen after the load is released.
(ν= 0.32, E= 70 GPa, σy = 300 GPa, σTS= 650 GPa.)

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:10, zionnahl

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

continue

Physics, 22.06.2019 17:30, tray9629

Patricia is trying to compare the average rainfall of new york to that of arizona. a comparison between these two states for the months of july through september would best be measured in

Answers: 3

continue

Physics, 22.06.2019 20:50, monae7803

In a game of pool, ball a is moving with a velocity v0 of magnitude v0 = 15 ft/s when it strikes balls b and c, which are at rest and aligned as shown. knowing that after the collision the three balls move in the directions indicated and assuming frictionless surfaces and perfectly elastic impact (that is, conservation of energy), determine the magnitudes of the velocities va, vb, and vc.

Answers: 3

continue

Physics, 22.06.2019 21:30, CM0

Ateacher gives students four liquids commonly found in the kitchen - vinegar, apple juice, dish detergent, and milk - and ph indicator strips, which measure acidity. the teacher asks the students to put the liquids in order from most acidic to most basic. what type of investigation could the students conduct to determine the correct order for the liquids?

Answers: 3

continue

You know the right answer?

Calculate the final volume (in cm3) of a 40 cm long cylindirical copper rod with a cross-sectional a...