Physics, 07.12.2020 09:10 Svetakotok

The two angled ropes are used to support the crate in Figure P5.7. The tension in the ropes can have any value up to 1500 N. When the tension exceeds this value, the ropes will break. What is the largest mass the ropes can support?

The two angled ropes are used to support the crate in Figure P5.7. The tension in the ropes can hav

Answers: 2

Show answers

Answers

Answer from: tyquanvicks13

170 kg

Explanation:

Free-Body Diagram:

Let's start by drawing a free body diagram for this problem. Let's call the tension in the left rope T_1 and the tension in the right rope T_2 .

Now we can construct a free body diagram using the horizontal and vertical components of the two tension forces.

Let's start with the left tension force:

Horizontal component (x): $T_1 \cdot cos(30)$ Vertical component (y): $T_1 \cdot sin(30)$

The right tension force:

Horizontal component: $T_2 \cdot cos(45)$ Vertical component: $T_1 \cdot sin(45)$

In order to see what these forces look like on the diagram, look at the first image attached. (1)

Now, we can create the FBD using the components of the tension forces and the force of gravity pulling on the crate, known as w.

The horizontal components of T_1 and T_2 go on the left and right of the FBD, respectively. The two vertical components go on top, and the weight force is on the bottom. We know that weight = mg.

To see what the free body diagram should look like, see the second image attached. (2)

Now that we have the FBD, we can write a system of equations using the sum of forces in both the x- and y-direction.

Since the crate is not moving in either the horizontal or vertical direction, we can say that the net force acting on the crate is 0.

$F_\text{net} = 0$

This means that the sum of x forces and the sum of y forces are both 0. Let's set the top and right to be the positive direction and the bottom and left to be the negative direction. Now we can write the system of equations:

$\sum F_x = T_2 \cdot cos(45) - T_1\cdot cos(30) = 0$ $\sum F_y = T_1 \cdot sin(30) +T_2\cdot sin(45) - mg = 0$

There are many ways to solve this system of equations, but I will be showing the top two ways that I tend to solve these types of problems.

Method 1:

Solve for $T_1 \cdot sin(30)$ and $T_1 \cdot cos(30)$ in both equations.

$T_1 \cdot cos(30) = T_2 \cdot cos(45)$ $T_1\cdot sin(30) = mg - T_2 \cdot sin(45)$

We know that $\frac{sin\theta}{cos\theta}$ = $tan\theta$ , so we can reorder both equations and divide them.

$T_1\cdot sin(30) = mg - T_2 \cdot sin(45)$ $T_1 \cdot cos(30) = T_2 \cdot cos(45)$ $tan(30)=\frac{mg-T_2\cdot sin(45)}{T_2\cdot cos(45)}$

Note that $\frac{T_1}{T_1}$ cancels, leaving us with tan(30).

Now that we have this equation, we can plug in known values. We are trying to solve for m, the largest mass of the crate that the ropes can support. We know that:

$g=9.8\ \frac{m}{s^2}$ $T_2=1500\ \text{N}$

Let's substitute these values into our equation:

$tan(30)=\frac{m(9.8)-(1500)\cdot sin(45)}{(1500)\cdot cos(45)}$

Multiply 1500 * cos(45) to both sides of the equation.

$tan(30) \cdot (1500 \cdot cos(45)) =9.8m-(1500 \cdot sin(45))$

Add 1500 * sin(45) to both sides of the equation.

$tan(30) \cdot (1500 \cdot cos(45)) + 1500 \cdot sin(45)) =9.8m$

Divide both sides of the equation by 9.8.

$\frac{tan(30) \cdot (1500 \cdot cos(45)) + (1500 \cdot sin(45)) }{9.8}= m$

Simplify.

$\frac{1673.032607}{9.8}=m$ m=170.717613

The largest mass the ropes can support is around 170 kg (round down, not up).

Method 2:

We can use the system of equations again.

$T_1 \cdot cos(30) = T_2 \cdot cos(45)$ $T_1\cdot sin(30) = mg - T_2 \cdot sin(45)$

This time, let's do a little guess and check. Using the first equation, plug in 1500 N for T2 and solve for T1.

$T_1 \cdot cos(30) = (1500) \cdot cos(45)$

Divide both sides of the equation by cos(30).

$T_1=\frac{1500 \cdot cos(45)}{cos(30)}$

Simplify.

$T_1=1224.744871 \ \text{N}$

Now plug in 1500 N for T1 and solve for T2.

$(1500) \cdot cos(30) = T_2 \cdot cos(45)$

Divide both sides by cos(45).

$T_2=\frac{1500\cdot cos(30)}{cos(45)}$ $T_2=1837.117307 \ \text{N}$

Since the tension cannot exceed 1500 N without the rope breaking, we must use the first substitution, where T_1=1224.744871 and $T_2=1500 \ \text{N}$ .

Now we can use these known values and plug them into the second equation: $T_1\cdot sin(30) = mg - T_2 \cdot sin(45)$

Add $T_2 \cdot sin(45)$ to both sides of the equation.

$mg=T_1 \cdot sin(30) + T_2 \cdot sin(45)$

Divide both sides of the equation by g.

$m=\frac{T_1 \cdot sin(30) + T_2 \cdot sin(45)}{g}$

Plug in known values and solve for m.

$m=\frac{(1224.744871) \cdot sin(30) + (1500) \cdot sin(45)}{9.8}$

Simplify.

$m=\frac{1673.032607}{9.8}$ m=170.717613

As you can see, we get the same answer with either method. The largest mass the ropes can support is 170 kg.

The two angled ropes are used to support the crate in Figure P5.7. The tension in the ropes can have

Answer from: Quest

Hey can someone me with my homework

Answer from: Quest

This is what a calorimeter is used for simpler ex, to measure calories in food.

Other questions on the subject: Physics

Physics, 22.06.2019 07:30, sansyboy7891

Quantum mechanics applies to subatomic, atomic, nanometer-size, and micrometer-size systems. nanometer, micrometer, and kilometer-size systems. atomic, nanometer-size, and micrometer-size systems. subatomic, atomic, and nanometer-size systems.

Answers: 2

continue

Physics, 22.06.2019 08:20, cutechickens13

A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?

Answers: 3

continue

Physics, 22.06.2019 12:30, cardsqueen

Consider a hydrogen atom in the ground state. what is the energy of its electron? =e= jj now consider an excited‑state hydrogen atom. what is the energy of the electron in the =5n=5 level? =e5= j

Answers: 3

continue

Physics, 22.06.2019 17:30, zabattle

Atruck driver is attempting to deliver some furniture. first, he travels 8 km east, and then he turns around and travels 3 km west. finally, he turns again and travels 13 km to his destination. what is the drivers distance

Answers: 1

continue

You know the right answer?

The two angled ropes are used to support the crate in Figure P5.7. The tension in the ropes can have...