Newton’s Laws of Motion can be applied to naturally occurring geological processes. The diagram shows how rock structures can be changed due to forces that occur on the surface of the Earth. How
does Newton’s Laws apply to the weathering of the rock structure?
A The rocks on the surface react to the forces of weathering.
B The gravitational pull on the rocks breaks the rocks apart leaving particles at the base of the
hill.
C As weathering breaks rocks apart on the top of the hill, the force of gravity pushes the rocks
to the surface below.
D Large rock structures found on the Earth’s surface can be weathered into smaller sediments
that are pulled downward by the force of gravity.

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g

The least penetrating form of radiation is