Physics, 22.10.2020 20:01 nique0808

No matter how fast you swing the mass, the angle that the mass was swinging below the horizontal would never reach zero degrees (i. e., it would never swing perfectly in the horizontal plane). Why

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:30, dashawn3rd55

Mutt and jeff are running along a path each pushing a cart loaded with rocks. if mutt's wagon has a mass two times greater than jeff's and they want to stay together, arriving at their destination at the same time, what must happen? a) jeff should slow down so mutt can catch up. b) mutt must use half as much force to push his cart. c) mutt must use twice as much force to push his cart. d) mutt and jeff will use the same force, but mutt will take bigger steps.

Answers: 1

continue

Physics, 22.06.2019 12:00, angelamirga332

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

Answers: 1

continue

Physics, 22.06.2019 18:50, rurbanok12

8.29 two streams containing pyridine and acetic acid at 25°c are mixed and fed into a heat exchanger. due to the heat-of-mixing effect, it is desired to reduce the temperature after mixing to 25°c using a stream of chilled ethylene glycol as indicated in the diagram. calculate the mass flow rate of ethylene glycol needed. the heat capacity of ethylene glycol at these conditions is approximately 2.8 kj/(kg k), and the enthalpy change of mixing (δmixh) is given below.

Answers: 3

continue

Physics, 22.06.2019 19:20, goawayyounoob21

Aproduction line at v. j. sugumaran's machine shop has three stations. the first station can process a unit in 7 minutes. the second station has two identical machines, each of which can process a unit in 16 minutes (each unit only needs to be processed on one of the two machines). the third station can process a unit in 10 minutes. ▼ is the bottleneck station, with a bottleneck time of nothing minutes per unit (enter your response as a whole number).

Answers: 3

continue

You know the right answer?

No matter how fast you swing the mass, the angle that the mass was swinging below the horizontal wou...