In the design of a timing mechanism, the motion of pin P in the fixed circular slot is controlled by the guide A, which is being elevated by its lead screw. Guide A starts from rest with pin P at the lowest point in the circular slot, and accelerates upward at a constant rate until it reaches a speed of 175 mm/s at the halfway point of its vertical displacement. The guide then decelerates at a constant rate and comes to a stop with pin P at the uppermost point in the circular slot. Determine the n- and t-components of acceleration of pin P once the pin has traveled 30° around the slot from the starting position.

Answer: a charge of -1.0  × 10⁻⁴ c must be placed  at x = 26 m.the sign of the charge will be the same sign as the  -4.0  µc charge.======electricstatic force between two point charges  is given by    where k is coulomb's constant,  8.99×10⁹  n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ =  6.0 µc, q₂ = -4.0  µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1  µc = 10⁻⁶ c)    the force from q₂    the force from q₃    the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃    isolating:     a charge of -1.0  × 10⁻⁴ c must be placed  at x = 26 m.the sign of the charge will be the same as the  -4.0  µc charge