Physics, 13.10.2020 16:01 12monkey6

Electrons are BLANK
not Blank
-lonic Bond

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 17:10, rebecca0022

Aspring with a mass of 2 kg has a damping constant 14 kg/s. a force of 3.6 n is required to keep the spring stretched 0.3 m beyond its natural length. the spring is stretched 0.6 m beyond its natural length and then released. find the position of the mass at any time t. (assume that movement to the right is the positive x-direction and the spring is attached to a wall at the left end.)

Answers: 3

continue

Physics, 22.06.2019 01:10, joejoefofana

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Answers: 3

continue

Physics, 22.06.2019 15:40, caveman171

Apotter's wheel moves uniformly from rest to an angular speed of 0.20 rev/s in 32.0 s. (a) find its angular acceleration in radians per second per second. rad/s2 (b) would doubling the angular acceleration during the given period have doubled final angular speed?

Answers: 1

continue

Physics, 22.06.2019 19:10, simmonss1185

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

continue

You know the right answer?

Electrons are BLANK
not Blank
-lonic Bond...