subject
Physics, 04.10.2020 05:01 heathersloan274

A) Qual é a perda (potência dissipada) nos cabos de cada uma das opções que foram apresentadas para a implementação do projeto de eletrificação? (veja esquemas na próxima página) (roteiro: encontre primeiro o resistor equivalente; a corrente que sai da fonte; e então a potência)

b) Em termos de potência, qual dos dois sistemas você escolheria e por quê? (Lembre-se que não é interessante ter perdas na transmissão (cabos) de energia, já que isso significa menos energia chegando nas casas).


A) Qual é a perda (potência dissipada) nos cabos de cada uma das opções que foram apresentadas para

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 17:00, miya214
The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.
Answers: 1
image
Physics, 22.06.2019 18:00, Zaydblackwood06
The photo shows sugar dissolved into a solution with excess sugar at the bottom of the jar this type of solution is classified as a. unsaturated b. compound c. saturated d. plasma
Answers: 1
image
Physics, 22.06.2019 18:00, itsyagirl11076
Sunidhi made a study chart about changes in states of matter. which headings best complete the chart?
Answers: 1
image
Physics, 22.06.2019 20:50, dorkygirl
An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)
Answers: 1
You know the right answer?
A) Qual é a perda (potência dissipada) nos cabos de cada uma das opções que foram apresentadas para...

Questions in other subjects:

Konu
Mathematics, 01.12.2020 02:10
Konu
Mathematics, 01.12.2020 02:10