subject
Physics, 03.09.2020 09:01 mahdy43

For motion maps that illustrate accelerated motion, what does a new level indicate? change in acceleration or direction
constant acceleration and direlon
increased velocity
decreased velocity
оо

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 20:00, aa985960
Which sentences describe disadvantages of burning fossil fuels instead of using hydrogen fuel cells? burning fossil fuels contributes to climate change. burning fossil fuels takes place inside expensive fuel cells. fossil fuels aren't widely available, but pure hydrogen is. fossil fuels are nonrenewable.
Answers: 1
image
Physics, 22.06.2019 18:10, coryowens44
Arefrigerator uses r-134a as the working fluid and operates on the ideal vapor-compression refrigeration cycle except for the compression process. the refrigerant enters the evaporator at 120 kpa with a quality of 34 percent and leaves the compressor at 70°c. if the compressor consumes 450 w of power, determine (a) the mass flow rate of the refrigerant, (b) the condenser pressure, and (c) the cop of the refrigerator. (0.00644 kg/s, 800 kpa, 2.03)
Answers: 1
image
Physics, 23.06.2019 00:30, gagedugan2019
Which of the following statements accurately describes the sign of the work done on the box by the force of the push? a. positive b. negative c. zero
Answers: 3
image
Physics, 23.06.2019 02:10, Nathaliasmiles
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.
Answers: 1
You know the right answer?
For motion maps that illustrate accelerated motion, what does a new level indicate? change in accel...

Questions in other subjects: