Answers: 1
Physics, 22.06.2019 11:30, georgesarkes12
1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? your
Answers: 2
Physics, 22.06.2019 18:30, Kittylover65
Blood pressure the total amount of blood the heart pumps in one minute 2. cardiac output the number of times your heart beats in a minute 3. dilate the amount of blood that the heart can pump in a single beat 4. heart rate the force exerted on the walls of the blood vessels by the blood that moves through them 5. stroke volume to widen or get larger in size
Answers: 3
Physics, 22.06.2019 20:30, helpmeplz33
The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?
Answers: 2
Physics, 23.06.2019 02:10, Nathaliasmiles
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.
Answers: 1
If the steam in the engine is able to raise a 30 kg piston to a height of 0.68 m, how much work has...
Mathematics, 03.05.2020 13:07
Chemistry, 03.05.2020 13:07