a variable force is exerted on a body of constant mass. the body initially at rest moves in a straight line. the following graph shows how the force varies with time. All frictional force are ignored. if the velocity of the object is 7m/s after 2 sec. the velocity after 3.4 sec will be approx. a)11.9 m/s b)20.2 m/s c)17 m/s d)28.9 m/s Please explain

In which scenario is the least amount of work done on a crate? a force of 120 n moves it 25 m. a force of 115 n moves it 26 m. a force of 130 n moves it 22 m. a force of 125 n moves it 27 m.

A248-g piece of copper is dropped into 390 ml of water at 22.6 °c. the final temperature of the water was measured as 39.9 °c. calculate the initial temperature of the piece of copper. assume that all heat transfer occurs between the copper and the water. remember, the density of water is 1.0 g/m

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?