![subject](/tpl/images/cats/fizika.png)
Physics, 13.08.2020 01:01 gporter9200
A brick is resting on a smooth wooden board that is at a 30° angle. What is one way to overcome the static friction that is holding the brick in place?Please help i will give brainliest lower the board so it's level with the ground roughen up the texture of the wooden board ___ raise the board to a higher angle press down on the brick in a direction that is perpendicular to the board
![ansver](/tpl/images/cats/User.png)
Answers: 1
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Other questions on the subject: Physics
![image](/tpl/images/cats/fizika.png)
![image](/tpl/images/cats/fizika.png)
Physics, 22.06.2019 06:20, jonmorton159
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
![image](/tpl/images/cats/fizika.png)
Physics, 22.06.2019 09:40, dakshshberry
Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?
Answers: 2
You know the right answer?
A brick is resting on a smooth wooden board that is at a 30° angle. What is one way to overcome the...
Questions in other subjects:
![Konu](/tpl/images/cats/istoriya.png)
![Konu](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 06:00
![Konu](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 06:00
![Konu](/tpl/images/cats/fizika.png)
Physics, 06.04.2021 06:00
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/health.png)
Health, 06.04.2021 06:00
![Konu](/tpl/images/cats/informatica.png)
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/himiya.png)
Chemistry, 06.04.2021 06:00
![Konu](/tpl/images/cats/informatica.png)
Computers and Technology, 06.04.2021 06:00