Physics, 23.07.2020 01:01 kyliewassup
Two stationary point charges of +3.00 nC and +2.00nC are separated by a distance of 50.0 cm. An electron is released from rest at a point midway between the charges and moves along the line connecting them. What is the electric potential energy for the electron when it is (a) at the midpoint and (b) 10.0 cm from the +3.00nC charge?
Answers: 3
Physics, 21.06.2019 18:10, HOTaco554
After the near spacecraft passed mathilde, on several occasions rocket propellant was expelled to adjust the spacecraft's momentum in order to follow a path that would approach the asteroid eros, the final destination for the mission. after getting close to eros, further small adjustments made the momentum just right to give a circular orbit of radius 45 km (45 × 10^3 m) around the asteroid. so much propellant had been used that the final mass of the spacecraft while in circular orbit around eros was only 545 kg. the spacecraft took 1.04 days to make one complete circular orbit around eros. calculate what the mass of eros must be.
Answers: 1
Physics, 21.06.2019 22:00, mjackson7208
Explain what makes a passenger in a turning car slide toward the door. critical thinking
Answers: 1
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
Physics, 22.06.2019 04:00, Isaacochoa780
The long handle on a rake is a(n) a. lever b. screw c. wedge d. inclined plane
Answers: 2
Two stationary point charges of +3.00 nC and +2.00nC are separated by a distance of 50.0 cm. An elec...
English, 18.12.2019 21:31
Mathematics, 18.12.2019 21:31
History, 18.12.2019 21:31