Physics, 21.07.2020 17:01 barstr9146

A loaded 375 kg toboggan is traveling on smooth horizontal snow at 4.50 m/s when it suddenly comes to a rough region. The region is 5.40 mlong and reduces the toboggan's speed by 1.20 m/s . a) What average friction force did the rough region exert on the toboggan?
b) By what percent did the rough region reduce the toboggan's kinetic energy?
c) By what percent did the rough region reduce the toboggan's speed?

Answers: 2

Show answers

Answers

Answer from: Jasten

The average frictional force exerted on the toboggan by the rough surface is 661.5 N.

The percentage of the toboggan kinetic energy reduction is 7.11%.

The percentage of the toboggan speed reduction is 26.67%.

The given parameters;

mass of the toboggan, m = 375 kginitial speed of the toboggan, u = 4.5 m/slength of the rough region, d = 5.4 mfinal speed of the toboggan, v = 1.2 m/s

The normal force on the toboggan is calculated as follows;

Fₙ = mg

Fₙ = 375 x 9.8 = 3675 N

The acceleration of the toboggan is calculated as follows;

$v^2 = u^2 + 2as\\\\2as = v^2 - u^2\\\\a = \frac{v^2 - u^2 }{2s} \\\\a = \frac{(1.2)^2 - (4.5)^2 }{2(5.4)}\\\\a = -1.74 \ m/s^2$

The coefficient of friction is calculated as follows;

$\mu_k = \frac{a}{g} \\\\\mu_k = \frac{1.74}{9.8} \\\\\mu_k = 0.18$

The average frictional force exerted on the toboggan by the rough surface;

$F_k = \mu_k F_n\\\\F_k = 0.18 \times 3675\\\\F_k = 661.5 \ N$

The initial kinetic energy of the toboggan is calculated as follows;

$K.E_i = \frac{1}{2} mu^2\\\\K.E_i = \frac{1}{2} \times 375\times 4.5^2\\\\K.E_i = 3,796.88 \ J$

The final kinetic energy of the toboggan is calculated as follows;

$K.E_f = \frac{1}{2} mv^2\\\\K.E_f = \frac{1}{2} \times 375\times 1.2^2\\\\K.E_f = 270 \ J$

The percentage of the toboggan kinetic energy reduction is calculated as follows;

$\frac{K.E_f}{K.E_i} \times 100\% = \frac{270}{3796.88} \times 100\% = 7.11 \%$

The percentage of the toboggan speed reduction is calculated as follows;

$\frac{1.2}{4.5} \times 100\% = 26.67 \%$

Learn more here: link

Answer from: jngonzo1226

a) The average friction force exerted on the toboggan is 653.125 newtons, b) The rough region reduced the kinetic energy of the toboggan in 92.889 %, c) The speed of the toboggan is reduced in 73.333 %.

Explanation:

a) Given the existence of non-conservative forces (friction between toboggan and ground), the motion must be modelled by means of the Principle of Energy Conservation and the Work-Energy Theorem, since toboggan decrease its speed (associated with due to the action of friction. Changes in gravitational potential energy can be neglected due to the inclination of the ground. Then:

$K_{1} = K_{2} + W_{f}$

Where:

$K_{1}$ , $K_{2}$ are the initial and final translational kinetic energies of the tobbogan, measured in joules.

$W_{f}$ - Dissipated work due to friction, measured in joules.

By applying definitions of translation kinetic energy and work, the expression described above is now expanded and simplified:

$f\cdot \Delta s = \frac{1}{2}\cdot m \cdot (v_{1}^{2}-v_{2}^{2})$

Where:

- Friction force, measured in newtons.

$\Delta s$ - Distance travelled by the toboggan in the rough region, measured in meters.

- Mass of the toboggan, measured in kilograms.

$v_{1}$ , $v_{2}$ - Initial and final speed of the toboggan, measured in meters per second.

The friction force is cleared:

$f = \frac{m\cdot (v_{1}^{2}-v_{2}^{2})}{2\cdot \Delta s}$

If $m = 375\,kg$ , $v_{1} = 4.50\,\frac{m}{s}$ , $v_{2} = 1.20\,\frac{m}{s}$ and $\Delta s = 5.40 \,m$ , then:

$f = \frac{(375\,kg)\cdot \left[\left(4.50\,\frac{m}{s} \right)^{2}-\left(1.20\,\frac{m}{s}\right)^{2}\right]}{2\cdot (5.40\,m)}$

$f = 653.125\,N$

The average friction force exerted on the toboggan is 653.125 newtons.

b) The percentage lost by the kinetic energy of the tobbogan due to friction is given by the following expression, which is expanded and simplified afterwards:

$\% K_{loss} = \frac{K_{1}-K_{2}}{K_{1}}\times 100\,\%$