Physics, 16.07.2020 23:01 Jonny13Diaz

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleration of 26.0 rad/s2 until a circuit breaker trips at time t = 2.40 s. From then on, it turns through an angle 435 rad as it coasts to a stop at constant angular acceleration. Part APart complete Through what total angle did the wheel turn between t=0 and the time it stopped? Express your answer in radians. θ = 570 rad Previous Answers Correct Part B At what time did it stop? Express your answer in seconds. t = nothing s Request Answer Part C What was its acceleration as it slowed down? Express your answer in radians per second squared.

Answers: 3

Show answers

Answers

a) The total angle of the grinding wheel is 569.88 radians, b) The grinding wheel stop at t = 12.354 seconds, c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Explanation:

Since the grinding wheel accelerates and decelerates at constant rate, motion can be represented by the following kinematic equations:

$\theta = \theta_{o} + \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

$\omega = \omega_{o} + \alpha \cdot t$

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

Where:

$\theta_{o}$ , $\theta$ - Initial and final angular position, measured in radians.

$\omega_{o}$ , $\omega$ - Initial and final angular speed, measured in radians per second.

$\alpha$ - Angular acceleration, measured in radians per square second.

- Time, measured in seconds.

Likewise, the grinding wheel experiments two different regimes:

1) The grinding wheel accelerates during 2.40 seconds.

2) The grinding wheel decelerates until rest is reached.

a) The change in angular position during the Acceleration Stage can be obtained of the following expression:

$\theta - \theta_{o} = \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\theta-\theta_{o} = \left(25\,\frac{rad}{s} \right)\cdot (2.40\,s) + \frac{1}{2}\cdot \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)^{2}$

$\theta-\theta_{o} = 134.88\,rad$

The final angular angular speed can be found by the equation:

$\omega = \omega_{o} + \alpha \cdot t$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\omega = 25\,\frac{rad}{s} + \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)$

$\omega = 87.4\,\frac{rad}{s}$

The total angle that grinding wheel did from t = 0 s and the time it stopped is:

$\Delta \theta = 134.88\,rad + 435\,rad$

$\Delta \theta = 569.88\,rad$

The total angle of the grinding wheel is 569.88 radians.

b) Before finding the instant when the grinding wheel stops, it is needed to find the value of angular deceleration, which can be determined from the following kinematic expression:

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

The angular acceleration is now cleared:

$\alpha = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot (\theta-\theta_{o})}$

Given that $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\theta-\theta_{o} = 435\,rad$ , the angular deceleration is:

$\alpha = \frac{ \left(0\,\frac{rad}{s}\right)^{2}-\left(87.4\,\frac{rad}{s} \right)^{2}}{2\cdot \left(435\,rad\right)}$

$\alpha = -8.780\,\frac{rad}{s^{2}}$

Now, the time interval of the Deceleration Phase is obtained from this formula:

$\omega = \omega_{o} + \alpha \cdot t$

$t = \frac{\omega - \omega_{o}}{\alpha}$

If $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\alpha = -8.780\,\frac{rad}{s^{2}}$ , the time interval is:

$t = \frac{0\,\frac{rad}{s} - 87.4\,\frac{rad}{s} }{-8.780\,\frac{rad}{s^{2}} }$

$t = 9.954\,s$

The total time needed for the grinding wheel before stopping is:

$t_{T} = 2.40\,s + 9.954\,s$

$t_{T} = 12.354\,s$

The grinding wheel stop at t = 12.354 seconds.

c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Answer from: Quest

the second one and the forth one are in the purple because they are opinions and the rest are in the yellow

explanation:

50 points to answer this question drag each tile to the correct location. classify the hypotheses ab

Answer from: Quest

force is mass*acceleration.

we have a very small mass: 11.4*0.001 kg

if we want 0.035n of force, we need an acceleration:

0.035 = 11.4*0.001*a

a = 0.035/(11.4*0.001) m/s^2

Other questions on the subject: Physics

Physics, 21.06.2019 18:00, heyhay5748

Abaseball has a mass of 0.145 kg and approaches a bat at 40.0 m/s. after it is hit, the ball leaves the bat at 50.0 m/s directly back. find the impulse of the bat on the ball. 7.25 kg*m/s 13.1 kg*m/s 5.80 kg*m/s 1.45 kg*m/s

Answers: 2

continue

Physics, 21.06.2019 22:00, Angelo1660

Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?

Answers: 3

continue

Physics, 22.06.2019 01:00, jayycruz59

An object is 10. cm from the mirror, its height is 3.0 cm, and the focal length is 2.0 cm. what is the image height? (indicate the object orientation by including the + or - sign with the answer.) hi = cm +1.33 -1.33 +0.75 -0.75

Answers: 2

continue

Physics, 22.06.2019 06:40, animaljamissofab

How does the kinetic energy of a charge change as the charge moves under the effect of an electric field from higher potential to lower potential? a. the kinetic energy increases. b.the kinetic energy decreases. c.the kinetic energy remains the same. d.the kinetic energy is always zero.

Answers: 1

continue

You know the right answer?

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleratio...