subject
Physics, 15.07.2020 08:01 allisonzawodny3533

A uniform 1.4 m, 18 kg beam hinged at point P on a wall is held horizontal by a vertical string that can withstand a maximum tension of 350 N. A 5.0 kg mass is suspended at the end of the beam. At what minimum distance d from the hinge, can the string be attached without breaking?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 21:20, edmistontrace53
Abearing is designed to a reduce friction b. support a load c. guide moving parts such as wheels, shafts and pivots d. all of the above
Answers: 3
image
Physics, 22.06.2019 02:00, llamasking
Chapter 23, problem 075 the figure shows a geiger counter, a device used to detect ionizing radiation (radiation that causes ionization of atoms). the counter consists of a thin, positively charged central wire surrounded by a concentric, circular, conducting cylindrical shell with an equal negative charge. thus, a strong radial electric field is set up inside the shell. the shell contains a low-pressure inert gas. a particle of radiation entering the device through the shell wall ionizes a few of the gas atoms. the resulting free electrons (e) are drawn to the positive wire. however, the electric field is so intense that, between collisions with gas atoms, the free electrons gain energy sufficient to ionize these atoms also. more free electrons are thereby created, and the process is repeated until the electrons reach the wire. the resulting "avalanche" of electrons is collected by the wire, generating a signal that is used to record the passage of the original particle of radiation. suppose the radius of the central wire is 24 âµm, the inner radius of the shell 2.3 cm, and the length of the shell 14 cm. if the electric field at the shell's inner wall is 2.8 ă— 104 n/c, what is the total positive charge on the central wire?
Answers: 1
image
Physics, 22.06.2019 05:40, izzyisawesome5232
An ideal polarizer with its transmission axis rotated 30 degrees to the vertical is placed in a beam of unpolarized light of intensity 10w/m^2. after passing through the polarizer, what is the intensity of the beam? a. 8.7 w/m^2 b. 7.5 w/m^2 c. 5.0 w/m^2 d. 10 w/m^2 e. 2.5 w/m^2
Answers: 1
image
Physics, 22.06.2019 06:10, crystalryan3797
Africtionless piston-cylinder contains 50 l of saturated liquid r-134a. the piston has a mass and an area resulting in an applied pressure of 500 kpa on the refrigerant. the refrigerant is now heated until its temperature rises to 70∘c. calculate the work (in kj) done during this process.
Answers: 3
You know the right answer?
A uniform 1.4 m, 18 kg beam hinged at point P on a wall is held horizontal by a vertical string that...

Questions in other subjects:

Konu
Mathematics, 06.04.2021 01:50