A series circuit contains a 3.00-H inductor, a 2.80-μF capacitor, and a 25.0-Ω resistor connected to a 120-V (rms) source of variable frequency. Find the power delivered to the circuit when the frequency of the source is each of the following. (a) the resonance frequency W(b) one-half the resonance frequency W(c) one-fourth the resonance frequency mW (d) two times the resonance frequency W(e) four times the resonance frequency mw

Using a wheel and axle, a farmer is trying to lift a bucket of water from the bottom of a well. the larger wheel has a radius of 40 cm compared to the axle that has a radius of 10 cm. if a bucket of water is 50 n, then how much effort is required to raise it? 12.5 n 200 n 2 n 500 n

Air is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. air enters the heat exchanger at 95 kpa and 20°c at a rate of 0.6 m^3/s. the combustion gases (cp = 1.10 kj/kg°c) enter at 160°c at a rate of 0.95 kg/s and leave at 95°c. determine the rate of heat transfer to the air and its outlet temperature.

Aspecified volume of space contains an electric field for which the magnitude is given by e=e0cos(ωt). suppose that e0 = 20 v/m and ω = 1.0 × 107 s−1. part a what is the maximum displacement current through a 0.80 m2 cross-sectional area of this volume? express your answer with the appropriate units. idisp, max i d i s p , m a x = nothing nothing request answer part b how would this area have to be oriented relative to the electric field to get this maximum displacement current?