A 1500 kg car travelling at 25 m/s collides with a 2500 kg van which had stopped at a traffic light. As a result of the collision the two vehicles become
entangled. Which of the following pairs given in the table below shows the
initial speed the entangled mass will move and the type of collision

In raising a 6200-n piano with a pulley system, the movers note that, for every 2.2 m of rope pulled down, the piano rises 0.12 m . ideally, find the force required to lift the piano.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Drag each tile to the correct box. tiles bra i sequence