The 355 kg container is hanging from a cable that is 6.15 m out on the 7 m arm. The arm has a mass of 345 kg. A cable that is attached at its end makes an angle of 32o with the horizontal. A. Calculate the tension in the cable B .Calculate the force on the hinge

Part a constants huck finn walks at a speed of 0.60 m/s across his raft (that is, he walks perpendicular to the raft's motion what is huck's velocity (speed and direction) relative to the river bank? express your answer to three significant figures and include the appropriate units. relative to the shore)

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.