Problem 3.
A 1.8 m wide by 1.0 m tall by 0.65m deep home freezer is insulated with 5.0cm thick Styrofoam insulation. At what rate must the compressor remove heat from the freezer to keep the inside at (-20°C) in a room where the air temperature is 25°C.

143.352 watt.

Explanation:

So, in the question above we are given the following parameters or data or information that is going to assist us in answering the question above efficiently. The parameters are:

"A 1.8 m wide by 1.0 m tall by 0.65m deep home freezer is insulated with 5.0cm thick Styrofoam insulation"

The inside temperature of the freezer = -20°C.

Thickness = 5.0cm = 5.0 × 10^-2 m.

Step one: Calculate the surface area of the freezer. That can be done by using the formula below:

Area = 2[ ( Length × breadth) + (breadth × height) + (length × height) ].

Area = 2[ (1.8 × 0.65) + (0.65 × 1.0) + (1.8 × 1.0)].

Area = 7.24 m^2.

Step two: Calculate the rate of heat transfer by using the formula below;

Rate of heat transfer =[ thermal conductivity × Area (T1 - T2) ]/ thickness.

Rate of heat transfer = 0.022 × 7.24(25+20)/5.0 × 10^-2 = 143.352 watt.

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!

it's a b and