Physics, 06.05.2020 22:15 datands

To be Answered in Sentences...

1. How does the equivalent resistance of a series circuit compare to the resistance values of the individual resistances in the circuit?

2. In a series circuit, one of the resistors is replaced with a resistor having a lower resistance value. How does this affect the current in the circuit?

Answers: 2

Show answers

Answers

Answer from: UratazZ

1. The equivalent resistance for the combination of resistors in series is equal to the algebraic sum of all its individual resistances.

2. The Current will increase and causes it to have less restriction.

Explanation:

I did the Exam and made a 100% with these answers.

Hope this Helps!!!

Answer from: fastpitchhailey1354

1. The parallel circuits can depend on more than that of of individual resistances can. You have only six resistors available, and all of the resistors have a value of 10.0

2. The equivalent resistance of a set of resistors in a series connection is equal to the algebraic sum of the individual resistances. Figure 10.3. 2: (a) Three resistors connected in series to a voltage source. (b) The original circuit is reduced to an equivalent resistance and a voltage source

Explanation:

Answer from: Quest

Kiloleter, mega leterhope this !

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Other questions on the subject: Physics

Physics, 21.06.2019 17:00, brookemcelhaney

What is the function of the commutator in a dc motor? a. to spin the magnet b. to change direct current into alternating current c. to change alternating current into direct current d. to spin the wire coil

Answers: 1

continue

Physics, 21.06.2019 22:00, natethawsm

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

Answers: 2

continue

Physics, 22.06.2019 05:00, anondriap

Which statements describe the movement of ocean currents around the globe? check all that apply. strong winds force warm water to sink to the ocean floor. the coriolis effect causes warm and cold water to mix. cool dense water sinks to the ocean floor. warm water replaces cool surface water. wind blowing parallel to the shore causes upwelling of cool water.

Answers: 1

continue

Physics, 22.06.2019 06:00, vittoriochavez9700

An object moves from position +34m to the position -15m in 15 seconds. what is the total displacement? what is the total velocity?

Answers: 3

continue

You know the right answer?

To be Answered in Sentences...

1. How does the equivalent resistance of a series circuit...