Physics, 06.05.2020 20:59 memoryofdale
A single slit forms a diffraction pattern, with the first minimum at an angle of 40 degrees from central maximum. Monochromatic light of 410 nm wavelength is used. The same slit, illuminated by a different monochromatic light source, produces a diffraction pattern with the second minimum at a 60 degree angle from the central maximum. The wavelength of this light, in nm, is closest to:
Answers: 1
Physics, 23.06.2019 08:30, 01222002
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
Physics, 23.06.2019 11:30, eaglesjohnson414
Which two statements are true about a system? a system is a group of objects analyzed as one unit. energy that moves across system boundaries is conserved there's only one way to define the boundaries of a system all systems are made by humans
Answers: 3
Physics, 23.06.2019 13:10, shilohtito
Provide a well-written hypothesis that can explore the function of the counterweight in a trebuchet.
Answers: 2
A single slit forms a diffraction pattern, with the first minimum at an angle of 40 degrees from cen...
Mathematics, 10.11.2019 04:31