Gravitational force is a(n)? A) attractive force B) repulsive force C) both an attractive and repulsive force D) neither an attractive or repulsive force

In the case of gravity, mediated by spin 2 particles, charge is mass, which is always positive. Thus, q1q2 is always greater than zero, and gravity is always attractive. For spin 0 force mediators, however, there is no restriction on the charges and you can very well have repulsive forces.

Explanation: C) both an attractive and repulsive force is the answer

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

we need answer choices