Show your work and resoning for the below requirement.
The automatic flag raising system on a horizontal flagpole attached to the vertical outside wall of a tall building has become stuck. The management of the building wants to send a person crawling out along the flagpole to fix the problem.
Because of your physics knowledge, you have been asked to consult with a group to decide whether or not this is possible.
You are all too aware that no one could survive the 250 foot fall from the flagpole to the ground. The flagpole is a 120 lb steel I-beam which is very strong and rigid. One side of the flagpole is attached to the wall of the building by a hinge so that it can rotate vertically. Nine feet away, the other end of the flagpole is attached to a strong, lightweight cable.
The cable goes up from the flagpole at an angle of 30° until it reaches the building where it is bolted to the wall. The mechanic who will climb out on the flagpole weighs 150 lbs including equipment. From the specifications of the building construction, both the bolt attaching the cable to the building and the hinge have been tested to withstand a force of 500 lbs.
Your boss wants to know if the mechanic will be OK at the far end of the flagpole, nine feet from the building.

This value is less than the maximum tension of 500 lbs, making it safe for man to go to the tip flap

Explanation:

We must work on this problem using the rotational equilibrium equations and then they compared the tension values that the cable supports.

Let's start with fixing a reference system on the hinge of the flag, we take as positive the anti-clockwise turn

 They indicate the weight of the pole W₁ = 120 lb and a length of L = 9 ft, the weight of the man W₂ = 150, we assume that the cable is at the tip of the pole

            - L + W₂ L + W₁ L / 2 = 0

            T_{y} = W₂ + W₁ / 2

            T_{y} = 120 + 150/2

            T_{y} = 195 lb

we use trigonometry to find the cable tension

             sin 30 = T_{y} / T

             T = T_{y} / sin 30

             T = 195 / sin 30

             T = 390 lb

This value is less than the maximum tension of 500 lbs, making it safe for man to go to the tip flap

             T < 500 lb

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in   melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.