Can anyone check it?

block a weighs 1.40 n, and block b weighs 4.20 n. the coefficient of kinetic friction between all surfaces is 0.30. find the magnitude of the horizontal force necessary to drag block b to the left at constant speed if a and b are connected by a light, flexible cord passing around a fixed, frictionless pulley.

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

What does si stand for, when referring to a system of measurement

Aresistor with an unknown resistance is connected in parallel to a 9 ω resistor. when both resistors are connected in parallel to an emf source of 21 v, the current through the unknown resistor is measured with an ammeter to be 4 a. what is the resistance of the unknown resistor? answer in units of ω.