subject
Physics, 25.04.2020 01:58 yurlgurllmay

When the 4-kg bob is given a horizontal speed of 2.5 m/s, it begins to rotate around the horizontal circular path A. If the force F on the cord is increased, the bob rises and then rotates around the horizontal circular path B. Determine the speed of the bob around path B. Also, find the work done by force F.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:50, lilybear1700
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
image
Physics, 22.06.2019 07:00, nandinipp0303
Ineed the answers for these promblems i have
Answers: 3
image
Physics, 22.06.2019 07:30, anonymous1813
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
image
Physics, 23.06.2019 00:50, georgeonnatreev2275
Aforce of 8,480 n is applied to a cart to accelerate it at a rate of 26.5 m/s2. what is the mass of the cart? 865 kg 320 kg 12.1 kg 3.12 kg
Answers: 1
You know the right answer?
When the 4-kg bob is given a horizontal speed of 2.5 m/s, it begins to rotate around the horizontal...

Questions in other subjects:

Konu
Mathematics, 22.02.2022 08:50
Konu
Mathematics, 22.02.2022 08:50