Physics, 24.04.2020 22:37 blueyish6422

A quality assurance engineer at a frying pan company is asked to qualify a new line of nonstick-coated frying pans. The coating needs to be 1.00 mm thick. One method to test the thickness is for the engineer to pick a percentage of the pans manufactured, strip off the coating, and measure the thickness using a micrometer. This method is a destructive testing method. Instead, the engineer decides that every frying pan will be tested using a nondestructive method. An ultrasonic transducer is used that produces sound waves with a frequency of f=25.0~\text{kHz}f=25.0 kHz. The sound waves are sent through the coating and are reflected by the interface between the coating and the metal pan, and the time is recorded. The wavelength of the ultrasonic waves in the coating is 0.0760-m. What should be the time recorded for the ultrasound wave to travel from the top of the coating down to the metal pan and back up to the top of the coating, if the coating is the correct thickness (1.00 mm)?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:20, deedee363

Given the position vector of the particle r(t)=(t+1)i+(t^2−1)j+2t k, find the particle's velocity and acceleration vectors at t=1

Answers: 1

continue

Physics, 22.06.2019 17:40, sosaucyy

Emmy kicks a soccer ball up at an angle of 45° over a level field. she watches the ball's trajectory and notices that it lands, two seconds after being kicked, about 20 m away to the north. assume that air resistance is negligible, and plot the horizontal and vertical components of the ball's velocity as a function of time. consider only the time that the ball is in the air, after being kicked but before landing. take "north" and "up" as the positive ‑ and ‑directions, respectively, and use ≈10 m/s2 for the downward acceleration due to gravity.

Answers: 2

continue

Physics, 22.06.2019 19:00, freddhendrickss

The built in flash in a compact camera is usally capable of giving correct exsposure for distance up to how many meters?

Answers: 1

continue

Physics, 22.06.2019 19:40, mcmccann4317

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc

Answers: 1

continue

You know the right answer?

A quality assurance engineer at a frying pan company is asked to qualify a new line of nonstick-coat...