A single slit diffraction experiment performed with an argon laser of wavelength 454.6 nm produces a pattern on a screen with dark fringes (minima) separated by 10 mm. If we switch to a helium laser of wavelength 632.8 nm, without changing anything else in the setup, what will be the new separation between dark fringes

Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 790 n/m. it is initially at rest on an inclined plane that is at an angle of 28 degrees with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is k = 0.14. in the initial position, where the spring is compressed by a distance of a = 0.18 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. b) if the spring pushes the block up the incline, what distance, l, in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.

Check the following equation for dimensional homogeneity: ⅆ mv=∫t1t2(f⁢cosθ)ⅆt where m is mass, v is velocity, f is force, θ is an angle, and t is time. check that each term in the equation has the following dimensions: [malbec] where you are to choose the coefficients a, b, c.