A hollow, conducting sphere with an outer radius of 0.257 m and an inner radius of 0.203m has a uniform surface charge density of +6.31×10−6C/m^2 . A charge of -0.870uC is now introduced into the cavity inside the sphere.

A)What is the new charge density on the outside of the sphere?

B)Calculate the strength of the electric field just outside the sphere.

C)What is the electric flux through a spherical surface just inside the inner surface of the sphere?

Which fators influence ocean currents

Initially, a particle is moving at 5.33 m/s at an angle of 37.9° above the horizontal. two seconds later, its velocity is 6.11 m/s at an angle of 54.2° below the horizontal. what was the particle's average acceleration during these 2.00 seconds in the x-direction (enter first) and the y-direction?

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.