Two cars of mass 3000 kg are 2 m apart. What is the force of gravity between them?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Is there a point between a 10 nc charge and a 20 nc charge at which the electric field is zero?

In which situation is the acceleration of a car negative? question 5 options: a)the velocity of a car was 75 km/hr over 4 hours. b)the velocity of a car reduced from 50 km/hr over one minute. c)the velocity of a car increased from 40 km. h to 75 km/h over 15 minutes. d)the velocity of a car was 45 km/hr at 2: 00pm and at 4: 00pm its velocity was 85 km/ht.