Physics, 08.04.2020 03:29 erieannapickett12

A 100-N force has a horizontal component of 80 N and a vertical component of 60 N. The force is applied to a cart on a level frictionless floor. The cart starts from rest and moves 2.0 m horizontally along the floor due to this force. What is the cart's final kinetic energy

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 02:50, lilybear1700

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Answers: 3

continue

Physics, 22.06.2019 03:00, alexanderavrett

Standing side by side ,you and a friend step off a bridge at different times and fall for 1.6s to the water below. your friend goes first, and you follow after he has dropped a distance of 2.0m. when your friend hits the water, is the seperation between the two of you 2.0m or more than 2.0m? verify your answer with a calculation.

Answers: 2

continue

Physics, 22.06.2019 17:40, hmontalvo22

Aball horizontally thrown from a cliff at 8m/s

Answers: 1

continue

Physics, 23.06.2019 00:30, cr22estiles

Why is no-till farming more sustainable than many traditional methods of farming

Answers: 3

continue

You know the right answer?

A 100-N force has a horizontal component of 80 N and a vertical component of 60 N. The force is appl...