A square loop of wire is held in a uniform 0.24 T magnetic field directed perpendicular to the plane of the loop. The length of each side of the square is decreasing at a constant rate of 5.4 cm/s. What emf is induced in the loop when the length is 14 cm?

Explanation:

Given that,

Magnetic field of 0.24T

B = 0.24T

Field perpendicular to plane i.e 90°

Rate of decrease of length of side of square is 5.4cm/s

dL/dt = 5.4cm/s = 0.054m/s

Since it is decreasing

Then, dL/dt = -0.054m/s

When L is 14cm, what is the EMF induced?

L = 14cm = 0.14m

EMF is give as

ε = - dΦ/dt

Where flux is given as

Φ = BA

Where A is the area of the square

A = L²

Then, Φ = BL²

Substituting this into the EMF

ε = - dΦ/dt

ε = - d(BL²)/dt

B is constant

ε = - Bd(L²)/dt

ε = -2BL dL/dr

ε = -2 × 0.24 × 0.14 × -0.054

ε = 3.63 × 10^-3 V

ε = 3.63mV

tube or goog will be great resources to find the answer to the question that you're asking

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water