The blade of an electric saw rotates at 2600 rev/min. Assume that the diameter of a typical saw that is used to saw boards in home construction and renovation is 10 cm. What is the linear speed in m/s of a point on the rim of the circular saw blade?

Acalorimeter uses the principle that thermal energy flows from hotter material to colder material until both reach the same

Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?

Estimate the kinetic energy of mars with respect to the sun as the sum of two terms, that due to its daily rotation about its axis, and that due to its yearly revolution about the sun. (assume mars is a uniform sphere with mass = 6.4×10 to the power of 23 kg, radius = 3.4×10 to the power of 6 m, rotation period = 24.7 hours, orbital period = 686 days and is 2.3×10 to the power of 8 km from the sun.)